Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: biesemeyer daycruiser

  1. #1
    brianthelion02
    Anyone have any info on these boats?Where they were made,etc.

  2. #2
    Senior Member
    Join Date
    Feb 2009
    Posts
    2,626
    Being as how there are a lot more V-drive Beisemeyers than jets, you should probably post this in that forum as well.

  3. #3
    Keithb87
    Beismeyer was made in Phoenix, AZ

  4. #4
    Back To Havasu
    Those jet daycruisers popped up in the late 60s, early 70s at Havasu. they were roomy, and affordable. They were among the early jet daycruisers. Before these boats, Campbell and Taylor pretty much had the daycruiser thing to themselves. Most have 455 Olds Power. Rusty Beismeyer founded the company and made many many of these boats before concentrating on monster v-drives in the 70s. Just my recollection.

  5. #5
    SB
    I have the 20.5 jet with BBF, 1977. Lots of people have heard of the circle racers, but aren't aware of the larger jets.

  6. #6
    brianthelion02
    http://www2.***boat.com/image_center...ofile&uid=3055 This is our hawaiian we picked up to play wi th while restoring the biesemeyer

  7. #7
    brianthelion02
    http://www2.***boat.com/image_center..._005-thumb.jpg http://www2.***boat.com/image_center...ofile&uid=3055 This is our hawaiian we picked up to play wi th while restoring the biesemeyer

  8. #8

  9. #9
    brianthelion02

  10. #10
    brianthelion02

Page 1 of 2 12 LastLast

Similar Threads

  1. New guy with a Biesemeyer
    By YumaBiesemeyer in forum Jet Boats
    Replies: 25
    Last Post: 05-16-2006, 05:19 PM
  2. biesemeyer daycruiser
    By brianthelion02 in forum V-Drives
    Replies: 1
    Last Post: 09-19-2005, 06:08 AM
  3. What is this? Is it a BIESEMEYER?
    By Lake Ape in forum Jet Boats
    Replies: 4
    Last Post: 12-10-2004, 09:28 PM
  4. 75 Biesemeyer
    By nelsonf in forum V-Drives
    Replies: 38
    Last Post: 12-15-2003, 08:00 PM
  5. Biesemeyer!
    By GofastRacer in forum V-Drives
    Replies: 32
    Last Post: 01-20-2003, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •