Transom mounted hatch switch...

[CornWater]

At the risk of causing an uproar, I have an actual boating question. Who makes those transom mounted hatch switches. Didn't they have a switch that swaps the existing drive switch with a two switch replacement.

[atomickitn]

At the risk of causing an uproar, I have an actual boating question. Who makes those transom mounted hatch switches. Didn't they have a switch that swaps the existing drive switch with a two switch replacement.
yes they do ! check with dana marine or dana boats we have them in stock

[CornWater]

yes they do ! check with dana marine or dana boats we have them in stock
Thanks.. I thought I checked Dana's site, maybe I'm just not smart enough to find it.
:cry:

[LUVNLIFE]

If the ones on Dana don't match, try Eddie marine. Not sure if they are dfferant or the same

[moneypit]

Are you telling me that they have a switch that can coincide with the outdrive switch that will raise and lower the engine hatch?
I get so sick of having to walk around the lifted engine hatch to get backin the boat. Tell me is this for real? :220v: :220v:

[burtandnancy]

Mount it right next to your trim/drive switch on your transom and be sure to use a hot lead so you don't have to get into the boat and turn on the Perko.

[LUVNLIFE]

The drive switch that I had on my Eliminator Eagle was a single switch, but I know they had the same style in a dual switch. The switch was next to the swim step

[BADBLOWN572]

River Dave is the one that manufactured the twin switch. One is for the drive and one is for the hatch. If you have a hatch ram, you need a double pole double throw switch. If you have hatch hinges, you need a single pole double throw switch. I just wired one up this past weekend as a matter of fact. They open the hatch from the back as well as raise and lower the drive. Nice product!

[CornWater]

I have the dual ram. Anyone have a link for this? I just keep finding replacements for the existing drive switch, but no accessory.

[phebus]

Just go with something like this from Dana Marine. They will sell you the switch panel engraved how you want it (drive/hatch), and with the proper switches
http://www.danamarineproducts.com/pa...PC-R-045-1.jpg
http://www.danamarineproducts.com/pa...SPC-0005-1.jpg
http://www.danamarineproducts.com/pa...s/SP-007-1.jpg