Bear with me here, I took my boat apart almost 2 years ago and I need some confirmation on the plumbing...
[img]http://www.***boat.com/image_center/data/500/57plumbing0001-med.jpg[/img]
I'll call this the t-stat housing(no tstat of course)I have them running to the t fitting that hooks to the pump to supply water to the engine.
[img]http://www.***boat.com/image_center/data/500/57plumbing0010-med.jpg[/img]
I'm pretty sure about that. But there are 3 fittings on each of the logs, on the front 2 and under neath the back into snail is 1.
[img]http://www.***boat.com/image_center/data/500/57plumbing0002-med.jpg[/img]
On the front the hoses from the water pump outlets are hooked to outer most front fittings and the inner most fitting has a hose that I hooked to the fitting back on the snail under neath.
[img]http://www.***boat.com/image_center/data/500/57plumbing0005-med.jpg[/img]
I had the old hoses and did not mess with the fittings it all seems kewl just looking for confirmation on routing
Thanks in advance
KC