Looking for help in Cam selection for small block chevy. What do you think with setup below?
In talking with Jegs and Comp Cam they suggest, 12-240
Gross Valve Lift - .480 /.489
Duration at .006 tappet lift - 270 / 286
Lobe Seperation 112
Here is my Boat and motor setup setup running in Fresh Water (Great Lakes)
19ft Hull (similar to a Donzi, but better)
350 chevy. Apha Drive
350 bored over .040 flat top pistons
Edelbrock Performer aluminum heads 64 cc chambers
Performer Intake
750 Holley Double Pumper
MSD Ignition
4 Inch thru hull exhaust
Suggestions for a better cam or is this pretty decent with current setup?