I need a little central heating help, question?

[rsoscia]

Yep bad design ... the metal rods above the burners break , after years of service , then fall out of the furnace and presto your attic is on fire

[hairysituation]

Its the limit switch

[Jyruiz]

Yep, according to this website http://www.cpsc.gov/cpscpub/prerel/prhtml01/01189.html
ALL heaters manufactured between 1983 and 1994
Yup, it is on there, model number matches. Thanks for the link.

[Jyruiz]

Yep bad design ... the metal rods above the burners break , after years of service , then fall out of the furnace and presto your attic is on fire
So what are my options?

[rsoscia]

What is the condition of the A/C unit... you dont have to replace the A/C ... Ive replace the heater only several times... let me know if your need a quote

[Jyruiz]

What is the condition of the A/C unit... you dont have to replace the A/C ... Ive replace the heater only several times... let me know if your need a quote
Yes, please give me a quote for the replacement of the heater.

[rsoscia]

call me right now check your pms

[Luckie Stiff]

So what are my options?
Unfortunately your only real option is to replace the heater, and if your A/C was installed in 91 as well, you might as well upgrade it to a higher SEER rated unit. I just did mine last summer, went with a Carrier Infinity, using 410A refrigerant, cost me roughly 6K with all the bells and whistles.

[Havasu1986]

So what are my options?
I got nothing here. Any questions about fire sprinklers. I'm your guy.

[Jyruiz]

Unfortunately your only real option is to replace the heater, and if your A/C was installed in 91 as well, you might as well upgrade it to a higher SEER rated unit. I just did mine last summer, went to a SEER 14 Amana, right at $4K for everything.
The AC unit was replaced in 97 I think, so I don't know if I want to replace that just yet.