i think sears sells a inverted tork's if not all the tool trucks do
Seat bolt in my 2003 suburban, I need to loosen it for my Sirius radio mount. I'm thinking it may be an E-torx? Unfortunately I can't find any local stores that carry E-torx wrenches or sockets (would need to be a deep well socket). I bought a Gator-grip universal socket but it wasn't deep enough to go over the bolt. Or should I just get a vicegrip to remove it and then replace it with a normal nut?
http://home.alltel.net/jthieme/Dscn4754e.jpg
i think sears sells a inverted tork's if not all the tool trucks do
Thanks! But $107.99 is a bit much for what I need it for. I did stop in at the local sears and they had nothing in the store, said the e-torx stuff was online or catalog only. I guess I can see if my local mechanic has one I can borrow for a short time.
Did you try a 6pt socket?
That is one of those special GM wrenches for that job.
Go to a GM dealer and borrow one for a minute from a mechanic then replace it when you get home with a regular nut.
Here's a source for female Torx!..
Torx! (http://www.cvfsupplycompany.com/toto7pcfetos.html)
Another One! (http://www.mytoolstore.com/sk/sk03097.html)
Vice grip it and replace with regular nut.
Vice grip it and replace with regular nut.
The only way to fly!