Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: ***Help Wanted***

  1. #1
    Senior Member
    Join Date
    Feb 2009
    Posts
    678
    Hi Evry1...
    its been along time, since i've been on here (over 1 yr)...i know some people & recognize others...anyways...awhile bk...i bought a Berk Jet-O-Vator from a friend of mine on here (cave)...i dont think it had all the parts & i dont know exactly how to hook it up (cant understand the dumb schmatic)...i guess im just stupid about some things lol...anyways...i need someone up in N. Az (Kingman, BHC, Havasu) to hook it up for me...any & all help would be appreciated...i'll even supply the beer lol
    thnx Ron

  2. #2
    Floored
    I'm in BHC but have a Place diverter. Squirtin Thunder lives in BHC also and has a berk so you might message him and just look at his and see what you need. He might be able to shoot pics and send them to ya, How about ya ST?

  3. #3
    Squirtin Thunder
    Hope this helps !!!
    http://www2.***boat.com/image_center...ber_Length.jpg
    http://www2.***boat.com/image_center...eering_Arm.jpg
    http://www2.***boat.com/image_center...ring_Arm_2.jpg
    Check out the Hoffman Eagle Steering Bolt Cover !!!
    http://www2.***boat.com/image_center...g_Swivel_2.jpg
    http://www2.***boat.com/image_center...e_Ears-med.jpg http://www2.***boat.com/image_center...e_Ears-med.jpg
    Hoffman Eagle Pumphttp://www2.***boat.com/image_center/data/520/2311P1010165-med.jpghttp://www2.***boat.com/image_center/data/520/2311P1010167-med.jpg
    http://www2.***boat.com/image_center...010170-med.jpg
    Contact me anytime !!!

  4. #4
    cave
    Hey Ron I had to use that part for my steering. LOL. Although this is nicer than the one I have. Mine is kinda Hoaky.
    http://www2.***boat.com/image_center...g_Swivel_2.jpg
    Everything else was sent sept the Oring.

  5. #5
    steelcomp
    Yeah yeah, that's all real pretty an stuff, but what does that have to do with a Jet-O-Vator?? :sleeping:
    What happened to the mini droop?

  6. #6
    cave
    Fastrat, Maybe this will help, These are the small parts.
    http://www2.***boat.com/image_center...1jetovato2.jpg
    If there is something missing maybe some one could let us both know. There was a brown plastic deal that was rotten that I could remeber if it was part of the Jetovator or not.

  7. #7
    cave
    Fastrat, Maybe this will help, These are the small parts.
    http://www2.***boat.com/image_center...1jetovato2.jpg
    If there is something missing maybe some one could let us both know. There was a brown plastic deal that was rotten that I couldn't remember if it was part of the Jetovator or not.
    This the rest
    http://www2.***boat.com/image_center...1jetovator.jpg

  8. #8
    Senior Member
    Join Date
    Feb 2009
    Posts
    678
    hey jim...
    i got all the parts u sent n/p...the only thing i noticed in the pics u just sent...was the piece for the steering rod...an extension piece...i can make that...i guess i will just have to figure out how the tube with the spring goes on & the cable from the shifter attaches...i'll let u know
    Ron

  9. #9
    Senior Member
    Join Date
    Feb 2009
    Posts
    678
    hey squirt...
    nice pics... thnx...but ur set-up is entirely different than mine...look at cave's pics...thats what i got...i just cant figure out how the tube with the spring goes on...i guess i'll just play with it lol... til i get it rite...thnx again
    Ron

  10. #10
    cave
    On the top picture with the small parts. The part on the bottom right attach├ęs to the steering tube in front of the spring. The bolt on the steering tube that is on the tube is on the outside. Take the spring off, push the tube through from the outside. A new tube gasket is required. then from the inside place the spring on the tube then the small clamp part on the bottom right of the top picture secures the tube in place. Compress the spring a about a 1/4 it length. Tighten the clamp. Push your steering stem through the tube. Then on the red cable the threaded side goes through the hole on the back of the transom adapter. There should be a hole there Ron. If not I'll take a pic of mine and e mail it to you.
    From outside ||======= then ////////// then {}.
    Bolt ||, Tube =======, Spring //////////, Spring clamp {}.
    I thought you had this all together Bud. Those sure are nicepics of a Pump rear end. Here is a pick of the way it was from the adapter when I first got the boat.
    http://www2.***boat.com/image_center...o_back_end.jpg
    How much for the Hoffman Eagle Steering Bolt Cover !!!
    I like it ALOT.

Page 1 of 2 12 LastLast

Similar Threads

  1. Wanted!!!wanted!!!wanted!!!boat
    By Cole Sanger in forum Sandbar
    Replies: 0
    Last Post: 06-01-2006, 08:13 AM
  2. Wanted!!!wanted!!!wanted!!!boat
    By Cole Sanger in forum Boating, East
    Replies: 0
    Last Post: 06-01-2006, 08:12 AM
  3. Wanted!!!wanted!!!wanted!!!boat
    By Cole Sanger in forum Boating, Central
    Replies: 0
    Last Post: 06-01-2006, 08:11 AM
  4. Wanted!!!wanted!!!wanted!!!boat
    By Cole Sanger in forum Boating, West
    Replies: 0
    Last Post: 06-01-2006, 08:10 AM
  5. WANTED-1959 chevy wagon wanted
    By BADASS38CHEVY in forum Sandbar
    Replies: 3
    Last Post: 12-06-2004, 08:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •